Not bad for a few simple mods on a Ls1

[300bhp per ton]

Quoting: JoeyAnderson

Finally got the nitrous on and tuned over the weekend.  The car is a 1998 SS with stock heads, MS3 cam and Pacesetters into TSP True Duals.  The TNT F1 150hp shot runs into the FAST 90/NW 90 combo.  The numbers are through my Moser 9" with 4.11 gears.

The timing tuner is pulling 3deg of timing and with the 150 fuel jet, the car leaned out.  We're now running the 200 fuel jet, which is too rich.  I'm going to be doing some research in the upcoming weeks to find a good "middle-of-the-road" fuel jet to lean this thing out and hopefully pick up some power. :)  The window switch is set from 4000-6500, we'll likely drop it down to 3500 before we hit the track with it.  Bottle pressure was between 930-940.

The red lines are motor, the green are on the hose.



Keep in mind that these are the 93 octane SAE corrected numbers with smoothing set at 5. The dyno was done on the stock 17s with 20lbs of air in the Mickey T drag radials. The belt was of course on the car and you can rest assured that not one dyno trick was used.

Special thanks to Tick Performance in Mt. Airy, NC for taking their time and making sure every little detail about the install was perfect and Alvin Anderson of PCMForLess for going out of his way to make sure everything was safe on the sauce.

Next up: heads. :)