Roadkill's 1983 Chevy Z28 - (Work Starts on Page 5)

[55starchief]

Hmmm thats a lot of money for something you probably wont need if you go the turbo route mate. Im pretty sure that your current headers will fit

[55starchief]

Quoting: Roadkill

Why ?

I think they do a package deal on the clutxh and fly wheel

[Roadkill]

Quoting: 55starchief

I think they do a package deal on the clutxh and fly wheel

Only for the LS-1

Some of their clutches are also only for billet steel flywheels, too.

Shifter, Hurst.

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_745811_-1_10523\" target=\"_blank\" rel=\"nofollow\">http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_745811_-1_10523

Or

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_83414_-1\" target=\"_blank\" rel=\"nofollow\">http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_83414_-1

[Roadkill]

Water pump.

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_750516_-1_10135\" target=\"_blank\" rel=\"nofollow\">http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_750516_-1_10135



AC delete.

http://www.hawksthirdgenparts.com/index.asp?PageAction=VIEWPROD&ProdID=1002\" target=\"_blank\" rel=\"nofollow\">http://www.hawksthirdgenparts.com/index.asp?PageAction=VIEWPROD&ProdID=1002

[ianjpage]

Quoting: Roadkill

Yup. They aren't clear.

I'm gonna take the k-member down to the barn on saturday.

ahh gotcha - easiest way to see i spose!!


Hmm i see the bill shopping list is adding up now

[55starchief]

Link Dump for Titsy should we need to hack the LT1 PCM at some point

http://www.akmcables.com/eprom.htm\" target=\"_blank\" rel=\"nofollow\">http://www.akmcables.com/eprom.htm

[Roadkill]

The 305ci has now sold.

The strip-down began yesterday and continued today . . .

Nose cone removed - ready for the crane to move in . . .

Carb / cleaner off, dizzy out, leads removed, headers off, valve covers swapped, rad removed, all eletrics disconnected etc . . .

Just the motor mounts left to unbolt and she's ready to come out.





The guy's coming over next Sunday to pick up . . he's also after a few other bits I've got . . and paying cash - all good.

Once it's gone I'll be dropping the old front suspension, A-arms, springs, shocks, brakes (ready for the new tubular stuff) then scrubbing down the engine bay and treating it to some POR-15.

The next stage is beginning.

[ianjpage]

[Rob]

LT1 induction

http://cgi.ebay.co.uk/Moroso-Induction-Kit-Camaro-Firebird-93-4th-gen_W0QQitemZ230213381269QQihZ013QQcategoryZ36680QQssPageNameZWDVWQQrdZ1QQcmdZViewItem\" target=\"_blank\" rel=\"nofollow\">http://cgi.ebay.co.uk/Moroso-Induction-Kit-Camaro-Firebird-93-4th-gen_W0QQitemZ230213381269QQihZ013QQcategoryZ36680QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[Roadkill]

Sundays activities :





Engine gone.

[F Body]

I see your using the Aldi chocks, I haven't used those yet but the axle stands are fine

[Roadkill]

I've only used the stands to support the axle (off of the car).

The chocks have been under the car since august I think, not rusted, nothing - very impressed.

[Titsy]

Quoting: Roadkill

The chocks have been under the car since august I think, not rusted, nothing - very impressed.

looks like they needed a little assistance though...

[Roadkill]

Quoting: Titsy

looks like they needed a little assistance though...

No the pegs were put there for "absolute" saftey when the car was jacked with no brakes attached.

It didn't once move but I thought it best safe then crushed.

[Roadkill]

Link dump :

Front Spring Isolators : $20

http://www.spohn.net/?action=product&pid=1162\" target=\"_blank\" rel=\"nofollow\">http://www.spohn.net/?action=product&pid=1162

Trans mount : $26

http://www.spohn.net/?action=product&pid=1034\" target=\"_blank\" rel=\"nofollow\">http://www.spohn.net/?action=product&pid=1034

Engine Mount : $50 OR $65

http://www.spohn.net/?action=product&pid=1157\" target=\"_blank\" rel=\"nofollow\">http://www.spohn.net/?action=product&pid=1157 OR http://www.spohn.net/?action=product&pid=1336\" target=\"_blank\" rel=\"nofollow\">http://www.spohn.net/?action=product&pid=1336

Trans Cross member : $115

http://www.spohn.net/?action=product&pid=1178\" target=\"_blank\" rel=\"nofollow\">http://www.spohn.net/?action=product&pid=1178

Hardware : $9

http://www.spohn.net/?action=product&pid=1129\" target=\"_blank\" rel=\"nofollow\">http://www.spohn.net/?action=product&pid=1129

Need to enquire regarding the Propshaft . . . . Maybe a case of fitting engine first.

[Roadkill]

(B-T) Carb : $585

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_360247_-1\" target=\"_blank\" rel=\"nofollow\">http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_360247_-1

OR

Standard Carb : $550

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_97572_-1\" target=\"_blank\" rel=\"nofollow\">http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_97572_-1

Manifold : $260

http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_66122_-1\" target=\"_blank\" rel=\"nofollow\">http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_66122_-1

[55starchief]

You can use the B/T carb in a N/A application its just the floats and seals that are changed over a standard one

[Roadkill]

That's what I though but was gonna email to make sure.

[Roadkill]

Quoting: Roadkill

Front Spring Isolators : $20

http://www.spohn.net/?action=product&pid=1162\" target=\"_blank\" rel=\"nofollow\">http://www.spohn.net/?action=product&pid=1162

Edit - checked last night - already have these !

[55starchief]

Your cowl induction hood idea, if you wanted to look at the canadian place i found i could be intrested in sharing shipping as they have the fender flares i want for the T/A

http://www.showcars-bodyparts.com/8292cam.html\" target=\"_blank\" rel=\"nofollow\">http://www.showcars-bodyparts.com/8292cam.html

[Roadkill]

Quoting: 55starchief

Your cowl induction hood idea, if you wanted to look at the canadian place i found i could be intrested in sharing shipping as they have the fender flares i want for the T/A

Will look now.

Propshaft $340

http://www.spohn.net/?action=product&pid=1096\" target=\"_blank\" rel=\"nofollow\">http://www.spohn.net/?action=product&pid=1096

[Roadkill]

Chevrolet Camaro 82 92 699-28-3 HOOD 2 IN. FUNCTIONAL COWL INDUCTION CAMARO $813.56

The one I was looking at it basically :

http://www.spohn.net/?action=product&pid=1693\" target=\"_blank\" rel=\"nofollow\">http://www.spohn.net/?action=product&pid=1693 @ $499

Not cheap . . . .

[55starchief]

Quoting: Roadkill

Chevrolet Camaro 82 92 699-28-3 HOOD 2 IN. FUNCTIONAL COWL INDUCTION CAMARO $813.56

er thats not glass fiber mate thats steel

[Roadkill]

Fair point.

This is the one I'm after (Bolt on) but their descriptions of products are sh!te.

http://www.showcars-bodyparts.com/camaro-82-92hood-cowlindctionHarwood12101.JPG\" target=\"_blank\" rel=\"nofollow\">http://www.showcars-bodyparts.com/camaro-82-92hood-cowlindctionHarwood12101.JPG

[55starchief]

LOL your right, the site isnt great but they have so many products its crazy. Probably best to email or call them and ask