kenwood 4channel amp for sale

[EDGE]

It's a Kenwood KAC-645, all works ok, just tested it again today, it looks like this:



it has light surface marks on the face, but nothing major at all.

works fine in 4 channel mode (4x50Wrms) and can also be bridged to power 2 subs nicely instead

looking for about £50 delivered by courier,

any takers before I ebay it?

[Jamieg285]

I'm not specifically looking for one right now, but do have plans for one in the future.  I've got a pair of 7x10s waiting to be fitted, and this sounds like it could be ideal.

Has it got speaker input?

[Jamieg285]

Never mind, I found a online manual, and it's not going to do what I need.

[EDGE]

nope, its not got a speaker level input, just low level rcas

you can get a little converter though to go from RCA to speaker level inputs though, are you trying to use a standard headunit with no rca outputs ?

youd need one of these... http://www.crutchfield.com/S-iuEU0c8gw0d/p_142SLC4/Scosche-SLC4.html\" target=\"_blank\" rel=\"nofollow\">http://www.crutchfield.com/S-iuEU0c8gw0d/p_142SLC4/Scosche-SLC4.html

im sure maplins do one too

[Andy]

Could be interested, can't remember how many RCA outs mine has... Will get back to you!

[Jamieg285]

Mine only has 1, but I'd want to use this amp bridged, which needs 2, but then it merges front/rear, which I don't want either.

[EDGE]

if you're bridging the amp are you trying to run the 7x10s in the shelf?  if so merging the front rear wont be an issue ...

the single RCA output will be full range all you'll need is a pair of rca splitters.... job done....

[Jamieg285]

Quoting: EDGE

the single RCA output will be full range all you'll need is a pair of rca splitters.... job done....

Good point.  I'll think about it then.

[EDGE]

a guy on the focus forum has made an offer for the amp, I'd offer it to either jamie or andy first though as they both expressed interest first, any chance you could let me know by midday tomorrow before I accept this offer?

cheers all :)

[Jamieg285]

If you've had an offer, I'll pass.

I'm probably better off researching for exactly what I need anyway.

Thanks for the giving me 1st offer though.

[Andy]

I'm ooowt to bud.

Have to look more into it.

[EDGE]

no worries lads, thought it was only fair :)

[Andy]

Bit OT, but any news on that intercooler? Not desperate, but if it was working it would be a treat to get it on and replace my o-rings

[EDGE]

ah yeah, sorry dude, got sidetracked.... I'll have another rummage around for it tomorrow morning and let you know :)