Ryan's IROC Thread

FUBAR · August 28, 2006, 12:05:40 PM

I'll take some more piccys when I take the car our tonight for a little spin

philoldsmobile · August 28, 2006, 02:40:51 PM

nice!

FUBAR · August 28, 2006, 06:54:55 PM

Night-time photo...
sorry for the quality but the phone camera isn't any good in the dark...

http://img.photobucket.com/albums/v223/ryanbudd/89%20IROC/BAFinished2Night.jpg\" target=\"_blank\" rel=\"nofollow\"> [img]http://img.photobucket.com/albums/v223/ryanbudd/89%20IROC/BAFinished2Night.jpg\" border=\"0\" alt=\"\" width=150>

Roadkill · August 29, 2006, 11:11:35 AM

Ahem.

Tart.

ianjpage · August 29, 2006, 11:15:48 AM

Quoting: Roadkill

Ahem.

Tart.

LOL - is rather "pimpish" though

55starchief · August 29, 2006, 11:49:35 AM

Quoting: ianjpage

LOL - is rather "pimpish" though

Nah thats the color change ones Pod found, they gently change through the color spectrum to sooth you as you drive

ianjpage · August 29, 2006, 12:01:31 PM

Quoting: 55starchief

Nah thats the color change ones Pod found, they gently change through the color spectrum to sooth you as you drive

hehehe

FUBAR · August 30, 2006, 06:05:49 AM

Ok... Underseal.

Is there a way that this can be done with a Spray gun & compressor? what products do you have to use? how good is it? are there difficulties?

The alternative is the Same Hammerite Paint on stuff I used on the Old Car.

Both myself and Shifty are planning on undersealing Cars this month

Also If i could Borrow some more Axle Stands that would be cool

55starchief · August 30, 2006, 06:09:45 AM

Quoting: FUBAR

Is there a way that this can be done with a Spray gun & compressor? what products do you have to use? how good is it? are there difficulties?

you can either schultz or wax oil both available from MK paint schultz is the heavier duty of the 2 but also the mesiest

FUBAR · August 30, 2006, 06:15:37 AM

Whats the cost like of this schults stuff? is it good? waxoyl seems fine for inners of panels etc to me but not so great for the actual floorpan.

Picked from another forum:
Whats the difference between Schultz and Waxyoy?
Shutz that I've used is a Black spray paint that sticks to anything and sets to a hard, stone chip proof, matt finish.

Waxoyl or the similar Wax Oil copy is waxy oily stuff that forms a layer of greasy crud on the surface of the metal.

FUBAR · August 30, 2006, 06:16:38 AM

Stupid Proxy Server making double posts!!!

FUBAR · August 30, 2006, 06:22:13 AM

Graeme,
What about POR15? can that be used with a compressor?

Would it be ok to use the Compressor & spay gun at the Barn?

55starchief · August 30, 2006, 06:22:41 AM

Ok just been over the body shop and this is there recomendation.

3M cavity wax all the open X members and box section would need a couple of cans @ #5 a can

then 3M schultz over everything on the underside for total protection again would need about 6 cans @ #5 each

If you and shifty bought together might be able to get some discount

FUBAR · August 30, 2006, 06:29:27 AM

Cool cheers m8, Cavity wax for the inners of doors / Rear Wing cavitys (Behind boot plastics) also i'd assume? or Schultz on that too?

Sounds like a plan to me...

FUBAR · August 30, 2006, 09:38:24 AM

Will I need any of this stuff?

http://www.justoffbase.co.uk/Schutz-Gun-Kit-Disposable-Heads-Sealey-SG14D;jsessionid=ac112b6b1f4382340a6ebf4d4bbda66cd90a8c463370.e3eTa3aSaxmTe3qQc3yNb3iSci1ynknvrkLOlQzNp65In0?sc=9&category=257\" target=\"_blank\" rel=\"nofollow\">http://www.justoffbase.co.uk/Schutz-Gun-Kit-Disposable-Heads-Sealey-SG14D;jsessionid=ac112b6b1f4382340a6ebf4d4bbda66cd90a8c463370.e3eTa3aSaxmTe3qQc3yNb3iSci1ynknvrkLOlQzNp65In0?sc=9&category=257

http://www.justoffbase.co.uk/Disposable-Heads-for-SG14D-Pack-of-6-Sealey-SG14D-ACC?category=471\" target=\"_blank\" rel=\"nofollow\">http://www.justoffbase.co.uk/Disposable-Heads-for-SG14D-Pack-of-6-Sealey-SG14D-ACC?category=471

55starchief · August 30, 2006, 09:39:47 AM

Quoting: FUBAR

Will I need any of this stuff?

Up to you matey, i can try and borrow the one from the bodyshop or you and shifty can go halves

FUBAR · August 30, 2006, 09:52:17 AM

For the price i'd rather not borrow stuff, just incase...

Its £15 for the gun & £10 for the extra set of disposable heads

FUBAR · August 30, 2006, 10:16:28 AM

double post again!

FUBAR · August 30, 2006, 10:17:18 AM

Might try and fit the new exhaust this Saturday, either that or Thursday evening, I don't know how long it will take...

55starchief · August 30, 2006, 10:17:51 AM

Quoting: FUBAR

Might try and fit the new exhaust this saturday...

personaly i would do that after ou underseal so as not to cover it in schultz

FUBAR · August 30, 2006, 10:18:22 AM

Quoting: 55starchief

personaly i would do that after ou underseal so as not to cover it in schultz

Good thinking Batman...

philoldsmobile · August 30, 2006, 02:08:31 PM

be VERY careful to completely cover every inch of the prop too, even a small ammount of shultz on it will create a vibration by throwing it out of balance..

schultz is pretty thick stuff, but is truly excelent.. it can also be over painted, so you can repaint the floorpans afterwards to regain some of that 'as new' look

55starchief · August 30, 2006, 02:10:29 PM

Quoting: philoldsmobile

be VERY careful to completely cover every inch of the prop too, even a small ammount of shultz on it will create a vibration by throwing it out of balance

Your gonna need to mask up quite a bit things like brake lines also need to be visable

philoldsmobile · August 30, 2006, 02:21:04 PM

yup.... t'aint just a point and squirt job..

Rocky · August 30, 2006, 03:04:19 PM

You can get lots of different underseal, oil based ,water based some dry some stay tacky with a certain amount of waxoil in them watch which one you use for what. And you WILL get it every where if the car isnt high enough your face especially. It does burn a bit especially in eye (trust me i know)