Project Monster BBQ

philoldsmobile · March 10, 2006, 12:16:59 AM

neither in stock as button head.. ery little button head stuff is stocked by anglia fastners, its rarely used because of the lower tightening threashold of the smaller hex.

philoldsmobile · March 10, 2006, 12:17:53 AM

tis ok, we can drill for them, and just bolt it down next week.

i am going to go to wicks tomorrow, ans see if they stock rivets (i'm sure they do)

55starchief · March 10, 2006, 12:19:55 AM

Well i have loads of M8 roofing bolts at work, these would do in the short term

philoldsmobile · March 10, 2006, 12:28:56 AM

ok, they only need to act as dowels... will have the proper items by next sat..

55starchief · March 10, 2006, 01:11:05 AM

Still need a some M14 mate to bolt the tank down, would guess at M12x 50 or 14 x 50 to be safe

Roadkill · March 10, 2006, 01:17:18 AM

I Have some rivets on site I can nab . . . let me know - I'm on site tomorrow MORNING !!!

Roadkill · March 10, 2006, 01:17:49 AM

Quoting: 55starchief

M14

??????

55starchief · March 10, 2006, 01:18:28 AM

Quoting: Roadkill

I Have some rivets on site I can nab . . . let me know - I'm on site tomorrow MORNING !!!

Yoink, thanks very much we need about 500

Roadkill · March 10, 2006, 01:18:31 AM

M10 would be ample TBH - M12 would "look" O.K and be belt and braces . . .

Roadkill · March 10, 2006, 01:19:03 AM

Quoting: 55starchief

Yoink, thanks very much we need about 500

Text me tomorrow morning around 9.00am to remind me . . .

55starchief · March 10, 2006, 01:20:08 AM

Quoting: Roadkill

M10 would be ample TBH - M12 would "look" O.K and be belt and braces . . .

Was thinking more about the bolt hole size in the tank mate, would rather fill the hole and it be overkill than loose the tank and kill someone

55starchief · March 10, 2006, 01:21:27 AM

Quoting: Roadkill

Quoting: 55starchief
Yoink, thanks very much we need about 500

Text me tomorrow morning around 9.00am to remind me . . .

will do, can you txt me at 8am to remind me to remind you

Roadkill · March 10, 2006, 01:22:11 AM

PhilO can do that.

55starchief · March 10, 2006, 01:23:54 AM

Quoting: Roadkill

PhilO can do that.

I would ask ryan but he would probably be

philoldsmobile · March 10, 2006, 01:40:39 AM

any idea what size the rivets are? i have 5 5.7mm dormer drills i have bought, would like to use them if i can!!

Roadkill · March 10, 2006, 01:59:25 AM

Yeah should be fine . . . I think I ordered 5.6mm drills for the job so

philoldsmobile · March 13, 2006, 01:01:00 AM

cool..

55starchief · March 13, 2006, 01:23:42 AM

Hmm thats odd, what happened to the picure philo posted of the side sheeted in?

Have we had a server crash and gone back a couple of days?

philoldsmobile · March 13, 2006, 01:26:06 AM

uhhh..... one min dude..

philoldsmobile · March 13, 2006, 01:32:51 AM

philoldsmobile · March 13, 2006, 01:36:19 AM

there is 95 rivets per side!

Incursus · March 13, 2006, 10:33:37 AM

Man thats looking cool

FUBAR · March 13, 2006, 11:24:57 AM

Hehe that looks sweet!

are all the tops fixed in too?

55starchief · March 13, 2006, 11:31:44 AM

Quoting: FUBAR

Hehe that looks sweet!
are all the tops fixed in too?

Not yet mate, need them left of so we can paint it

FUBAR · March 13, 2006, 11:38:06 AM

Quoting: 55starchief

Not yet mate, need them left of so we can paint it

Aah I see, okey dokey, looks good though

are we cutting in a wheel arch?