Project Monster BBQ

[FUBAR]

So the Ally Tops and the Ply, wall lining need to go in this weekend?
what can we fix the ply with?

[Roadkill]

Quoting: FUBAR

what can we fix the ply with?

Teks ?

[55starchief]

Quoting: FUBAR

what can we fix the ply with?

Rivets mate.

As for the floor ply i called gibbs and dandy they have 18mm shuttering ply for £13+VAT 8x4 sheet this should be good enough for the flooring

***EDIT***

Dean do you still have those rivets?

[FUBAR]

I think we'll need more than 1 sheet do do the floors m8, the sizes needed for the 2 back sections I don't think fit into 1 8x4' sheet... + there's the front lockers too

[55starchief]

Quoting: FUBAR

I think we'll need more than 1 sheet do do the floors m8, the sizes needed for the 2 back sections I don't think fit into 1 8x4' sheet... + there's the front lockers too

I meant the grade mate not a single sheet

[Roadkill]

Quoting: 55starchief

Dean do you still have those rivets?

Hmm, last see buried in the van . . . The van is at the Garage - I'll check when It comes back . . . .

[Roadkill]

BTW - How many sheets are we looking at ?

Also If using Rivets through wood - would it be an idea to use penny washers to spread the load ?

I got loads, here.

[FUBAR]

Quoting: 55starchief

I meant the grade mate not a single sheet

Aah ok,

Cuh! me noob!

[Roadkill]

Quoting: 55starchief

Might find a speed rating on the blade if you look

O.K

I've got one 180mm Dia. Ally Disc.
and one 180mm Dia. Steel disc. - Max Rev. 3,500 rpm.

[55starchief]

Quoting: Roadkill

I've got one 180mm Dia. Ally Disc.
and one 180mm Dia. Steel disc. - Max Rev. 3,500 rpm.

Ok looks like the saw i have is 5000 rpm, am prety sure if we use the 110v power out with a 240v saw we ill get half that speed.

That 5000rpm is no load speed

[Roadkill]

Quoting: 55starchief

That 5000rpm is no load speed

So loaded will be a lot less . . . .

[55starchief]

Quoting: Roadkill

So loaded will be a lot less . . . .

yeah, i might just go with it mate as its only a couple of cuts. What do you think?

[Roadkill]

I Think you'll know if its not happy.

[philoldsmobile]

definatley want penny washers for the wood..

on a side note, the astro is now correctly wired, and i'm testing the lights on my parents caravan in about an hour, and i have finaly cut the 3" holes on the stack flange.

used a plasma (so went slightly under 3" so we didn't have any gaps) and it took literaly 30 seconds...

[55starchief]

Quoting: philoldsmobile

used a plasma (so went slightly under 3" so we didn't have any gaps) and it took literaly 30 seconds...

mmmmmm plasma me want

[philoldsmobile]

hell of a piece of kit mate, very dramatic (and loud) in use!

[philoldsmobile]

-update-

checked wiring with caravan, and all working 100% so if there are any lighting issues now with the BBQ, its on the trailer side of things..

i'm ready to tow.

[FUBAR]

So's he...

[55starchief]

Ok then, moving back on to topic now

[philoldsmobile]

ironicly, with a new standard flasher unit ( i had one sitting here) the indicators flash normal speed with a trailer, so i didn't need that heavy duty unit i orderd after all!

[Incursus]

Quoting: FUBAR

So's he...

[55starchief]

I think ryan might have been on the sauce tonight when he posted that

[Incursus]

[FUBAR]

Quoting: 55starchief

I think ryan might have been on the sauce tonight when he posted that

Nope no beer for me still, not for another week

[Roadkill]

Quitter.