Project Monster BBQ

philoldsmobile · March 28, 2006, 07:52:25 PM

f**K... i work in edison road!! never seen that place though.

ok, if you could give me all rough lengths, i'll sort it..

the wood for the deck is proving to be a bugger, as its not stopped raining all week.. i sugest cutting it to length on saturday, and staining it at the barn, then screwing it down sunday morning..

Incursus · March 28, 2006, 07:58:16 PM

Quoting: incursus

Ok I can get an Alpine LCD monitor 8" wide. Model number TVE-T850.

comes with TV tuner thingy and remote, But......

Only information I can find is in Japanese plus it only displays NTSC.

Basically its for the Japanese market.

What you reckon?
Any use?

Got it

55starchief · March 28, 2006, 07:59:44 PM

Quoting: philoldsmobile

f**K... i work in edison road!! never seen that place though.

ok, if you could give me all rough lengths, i'll sort it..

I would cut the 50x50 in half as we need 4 pieces at 27"
The top trim i would cut into 8' lengths as this is the longest we would need

The channel section again i would cut in half.

i think that should work out ok, have a think and see if it works out

philoldsmobile · March 28, 2006, 08:30:06 PM

do you know if they will cut to length?

55starchief · March 28, 2006, 08:33:12 PM

Quoting: philoldsmobile

do you know if they will cut to length?

why not drop in and see them if they are near your work

philoldsmobile · March 28, 2006, 08:53:43 PM

uhh.... grand total with vat is £86.59

sure this is really nesicary right now? got 2 cars to tax, and bling ticket to buy, its getting f.kin expensive...

philoldsmobile · March 28, 2006, 08:54:39 PM

why not just get the 4 corners, and rail for the rear panel now, and do the tops after bling...

the 3 lengths for the top really bump the price up, otherwise we could just have 2 lengths to worry about now..

55starchief · March 28, 2006, 08:55:53 PM

Quoting: philoldsmobile

uhh.... grand total with vat is £86.59

Well i think some people need to help out here.

philoldsmobile · March 28, 2006, 08:56:57 PM

time is of the essence, wont be able to get it untill at least thursday, so i can pick up the corners and rear peaces ( 2 lengths total) then we can have a whip round at bling for the rest..

Roadkill · March 29, 2006, 12:09:00 PM

Quoting: 55starchief

Well i think some people need to help out here.

Yep, I'll donate to the MKBBBQ Fund.

55starchief · March 29, 2006, 01:20:24 PM

Ok have grabed a load of blanking plugs from my mate at the hose center and he is looking for a buterfly valve for the CNC heat control

philoldsmobile · March 29, 2006, 11:07:04 PM

sweet..

i'll try and get the ally tomorrow

FUBAR · March 30, 2006, 01:41:28 PM

Do we have everything we need for Saturday? Is there anything I need to bring except for a Pair of Hands?

Roadkill · March 30, 2006, 04:13:03 PM

WHAT SIZE BOLTS FOR THE DIESEL GENNY ?

55starchief · March 30, 2006, 04:14:11 PM

Quoting: Roadkill

WHAT SIZE BOLTS FOR THE DIESEL GENNY ?

you mean you didnt look

bring a selection 10,12,14 in long lengths we can always cut them down

Roadkill · March 30, 2006, 04:45:49 PM

philoldsmobile · March 30, 2006, 09:58:23 PM

ok, got 2 4 m lengths of 50 50 x 3 and 1 4 meter length of the chanel section. total so far is £58.99 (all lengths have been cut in half)

also have some 3mm welded stainless mesh for the cooking surface..

its 20" wide x 30" long ATM, so is pretty much ideal if we want to use one large grill and a hotplate..

its also easy to handle so will not be a problem hoiking it out to add more coal, something that could be an issue of the hotplate were dead central, plus its probably a good idea to put a couple of M6 capheads on the rails next to the hotplate to hold it in place (like dowels) - dont really fancy it sliding around in transit..

philoldsmobile · March 30, 2006, 10:31:10 PM

Quoting: FUBAR

Do we have everything we need for Saturday? Is there anything I need to bring except for a Pair of Hands?

i dont think so, i believe its all in hand..

55starchief · March 30, 2006, 11:31:32 PM

Camlocks arived along with the handles.

Dean can you bring the 9" Grinder mate

Have also found a good supply of 18mm ply at work mainly off cuts but big enough for us.

Philo you gonna fiber glass the inside of the wheel arches?

Ryan did you say you had some underseal?

Roadkill · March 31, 2006, 01:46:21 AM

Keep this "

ed" to remind me tomorrow.

FUBAR · March 31, 2006, 09:40:23 AM

Quoting: 55starchief

Ryan did you say you had some underseal?

I do indeed, will bring that with me, there's about 1/2 a tin of Hammeright stuff + some POR15 we can use, i'll also bring a brush.

Graeme did you manage to get that Speaker stand? If so i'll bring the Pump to test fit it.

55starchief · March 31, 2006, 01:37:59 PM

Who is coming back to mine tonight so that we can get an early start. Ryan i think if you leave now you shoud get enough sleep for an 8:30 start

Incursus · March 31, 2006, 01:40:20 PM

Quoting: 55starchief

Who is coming back to mine tonight so that we can get an early start. Ryan i think if you leave now you shoud

Gonna need to take the Fiero to the barn tomorrow so I'll have to go back to Deans tonight, if I want to drink tonight......which I do.

Roadkill · March 31, 2006, 01:43:33 PM

Quoting: 55starchief

Who is coming back to mine tonight

Dunno, yet. TBH, I'd forgotten to mention it to Sammy.

She's working, though so.

55starchief · March 31, 2006, 01:51:11 PM

Quoting: Incursus

Gonna need to take the Fiero to the barn tomorrow so I'll have to go back to Deans tonight

That mean your gonna be there about midday?

If we want to get it finished we really need an early start, remember some of us have to be in MK for 6pm