Project Monster BBQ

Roadkill · March 31, 2006, 02:03:23 PM

Graeme - Has the Genny got a 110v Output.

I've got the 9" Grinder - but the Transformer's on site.

Can get a 110v Extention lead, too.

Got a selection of bolts for the Diesel Genny . . .

May not be able to cut the Ally plate required due to lack of Power supply . . . .

55starchief · March 31, 2006, 02:04:52 PM

Quoting: Roadkill

Graeme - Has the Genny got a 110v Output.

Yup, the petrol one has 110V out let, will have to kill all 240 stuff though as it wont output both at the same time

Roadkill · March 31, 2006, 02:07:18 PM

O.K, trying to source a 110v tranny anyway . . . I'll grab a lead worst case . . . .

The ally plate is here and ready in 1m x 2m sheets . . . . . To big for the chav'scort (already heavily laden with stuff for Sunday).

Ideas ?

55starchief · March 31, 2006, 02:08:43 PM

Quoting: Roadkill

The ally plate is here and ready in 1m x 2m sheets . . . . . To big for the chav'scort (already heavily laden with stuff for Sunday).

Ideas ?

Philo? i guess if he came back to your place tonight he could pick up the sheet

Roadkill · March 31, 2006, 02:10:38 PM

I have my "Own Stock" of 5 sheets at home . . . . . . . That means me buying another sheet from work to replace it, but if that's the only way . . . .

55starchief · March 31, 2006, 02:12:59 PM

Quoting: Roadkill

I have my "Own Stock" of 5 sheets at home . . . . . . . That means me buying another sheet from work to replace it, but if that's the only way . . . .

Surely a small sacrafice for the greater cause mate

Roadkill · March 31, 2006, 02:30:04 PM

Just checked over the sizes again . . . . . . .

We'll need 2 sheets.

Hey-Ho, They're there . . . . I'm assuming PhilO's coming tonight ?

Roadkill · March 31, 2006, 02:30:51 PM

Rivets . . . . . . . . I'll check, but don't hold out much hope.

55starchief · March 31, 2006, 02:31:05 PM

Quoting: Roadkill

Hey-Ho, They're there . . . . I'm assuming PhilO's coming tonight ?

I guess so.

You got any M6 nuts or they to small for your stuff?

Roadkill · March 31, 2006, 02:32:17 PM

Quoting: 55starchief

You got any M6 nuts

Not at the Unit . . . . . Maybe in my Tool box in the Garage.

Remind me tonight. How many do you need ?

May even have Nyloks

55starchief · March 31, 2006, 02:33:17 PM

Quoting: Roadkill

Not at the Unit . . . . . Maybe in my Tool box in the Garage.

Remind me tonight. How many do you need ?

May even have Nyloks

dont worry then mate, it was instead of the rivets for the edging stip on the tank

Roadkill · March 31, 2006, 02:42:02 PM

Quoting: 55starchief

dont worry then mate, it was instead of the rivets for the edging stip on the tank

How many ?

If I have some they'd only have been "Liberated" from other previous places of employment.

55starchief · March 31, 2006, 02:42:52 PM

Quoting: Roadkill

How many ?

If I have some they'd only have been "Liberated" from other previous places of employment.

Would need about 100 max

Roadkill · March 31, 2006, 02:49:48 PM

As I say . . . Remind me tonight . . . Or if you beat me back have a butcher's in the Garage - in the Red toolbox . . . 4th drawer down . . . .

(Watch out for Spike bombs)

Roadkill · March 31, 2006, 04:50:30 PM

O.K, got a 110v lead . . . trans. is out and I won't be able to get it 'til at least sunday.

Also all rivets from the last job were left on site - so that's a no-no, too.

I'll text PhilO to ask about the transport of Ally plates tonight . . . .

55starchief · March 31, 2006, 04:53:30 PM

Quoting: Roadkill

O.K, got a 110v lead . . . trans. is out and I won't be able to get it 'til at least sunday.

Also all rivets from the last job were left on site - so that's a no-no, too.

No problem we have 110v on the geny, no worries about rivets i have M6 nuts now.

Philo has to work first thing so if you could come back tonight we would have a jump on getting the boarding done otherwise we will run out of time.

Incursus · March 31, 2006, 05:19:54 PM

Quoting: 55starchief

That mean your gonna be there about midday?

Your thinking of Ryan

I'll be there earlier got lots to do if I'm taking the Duster.....or the Fiero for that matter.

Normally not there till late morning cos I go to the gym but i'll be giving that a miss tomorrow.

Jamieg285 · March 31, 2006, 05:45:56 PM

When's the planned 1st cook-up?

I would like to try and get there for it if possible.

Jamieg285 · March 31, 2006, 05:46:16 PM

Note, that's not the test firing, but the 1st use in anger.

55starchief · March 31, 2006, 05:55:25 PM

Quoting: Jamieg285

that's not the test firing, but the 1st use in anger.

Thursday night if we go or friday night

Jamieg285 · March 31, 2006, 05:56:50 PM

MMM, OK. Might be able to make Fri night. Will have to see.

55starchief · March 31, 2006, 05:59:19 PM

Quoting: Incursus

Normally not there till late morning cos I go to the gym but i'll be giving that a miss tomorrow.

Im gonna try and be there for 8:30am we might need some more gas for the genny whos turn is it?

Incursus · March 31, 2006, 07:36:33 PM

Quoting: 55starchief

Quoting: Incursus
Normally not there till late morning cos I go to the gym but i'll be giving that a miss tomorrow.

Im gonna try and be there for 8:30am we might need some more gas for the genny whos turn is it?

I think philo has plans fer me in the mornin...

so might be a little later than planned.
But if he's not late I would guess an ETA of 09:30

Ryan and I bought the last lot 'o' gas

55starchief · April 03, 2006, 02:26:22 PM

Final push this week if we want this thing for Bling on thursday afternoon

Anyone coming over tonight? I will be there from 5pm

Have now got the tyres for the rims so will get them fitted

Incursus · April 03, 2006, 03:30:37 PM

Just found out its gonna cost me £70 to fix the Renault

. so at this point I can't even afford to fuel to get to brackley not if I want to go to billing at all this weekend.